$50.61
These Perforated Screens act like strainers inside your pump. Choose the screen for your model: #4503005 for DVP LC.12 or #4502009 for DVP LB.40. Replace or clean them during routine maintenance to keep your pump running strong.
Screen, Perforated - DVP LB.40, Part # 4502009PP
Screen, Perforated - DVP LB.40, Part # 4502009PP
Your DVP vacuum pump works hard every day. It pulls air, oil, and sometimes tiny particles along with it. Over time, those small particles add up. They can scratch parts, block oil flow, and ruin your vacuum.
That is where a perforated screen comes in. Think of it as a strainer, like the one you use in your kitchen sink. The tiny holes in the screen catch debris while letting the oil or air pass through freely
DVP uses perforated screens in different pump models. Here are the two we carry:
For DVP LC.12 pumps – Part #4503005
This screen fits the DVP LC.12 model, a lubricated rotary vane pump. It is typically located in the oil system or at an inlet port.
For DVP LB.40 pumps – Part #4502009
This screen fits the DVP LB.40 model. The LB.40 is a larger, industrial-grade pump. The screen protects critical internal passages from debris.
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
|
|
|
0% |
Keep your DVP vacuum pump running clean with this air intake filter. This filter stops dust, dirt, and other airborne particles from entering your pump. Clean air means longer pump life and better performance. Designed and manufactured by DVP for a perfect fit.
Keep your DVP dry vane vacuum pump running clean with this air intake filter. Made specifically for DVP SB16 and SB25 dry-running vane pumps . This filter stops dust, dirt, and other particles from entering your pump. Clean air means longer pump life and better performance. OEM quality direct replacement.
Air Filter is used for DVP dry vane of pump models SB16, SB25
Replace the worn coupling spider in your DVP vacuum pump with this Rotex 28 spider element. Made for DVP LC 105 pumps. This flexible polyurethane spider connects the motor shaft to the pump shaft. It transmits power while absorbing shocks and compensating for minor misalignment. A small part that keeps your pump running smoothly.
This is a Rectangular Gasket with part number 4901020PP for DVP LB.40 series vacuum pumps . It is designed to seal rectangular port connections on the pump. Made from high-quality gasket material, it provides a reliable seal against air leaks and oil seepage.
10 in stock
Keep your DVP LC150 vacuum pump running clean with this
This is an exhaust filter / air-oil separator (Part # 1801063). It is designed and manufactured by DVP for use in the LC150 vacuum pump .
This filter sits inside your pump’s exhaust system. Its job is to catch tiny oil droplets before they leave the pump. Clean air goes out. The oil stays inside where it belongs.
air-oil separator / exhaust filter. This filter removes oil mist from the exhaust air before it leaves your pump. Without a good separator, oil vapor escapes into your workspace. Designed and manufactured by DVP for a perfect fit
Keep your DVP dry vane vacuum pump running clean with this air intake filter. Made specifically for DVP SB and SC series dry-running vane pumps in sizes 60 through 140 . This filter stops dust, dirt, and other particles from entering your pump. Clean air means longer pump life and better performance. OEM quality direct replacement.
Keep your DVP LC 25 vacuum pump running clean with this air-oil separator / exhaust filter. This filter removes oil mist from the exhaust air before it leaves your pump. Without a good separator, oil vapor escapes into your workspace. Designed and manufactured by DVP for a perfect fit .
Keep your DVP lubricated vane pump running smoothly with this oil filter. Made specifically for DVP LB180 and LB250 pumps . This filter removes dirt, debris, and other contaminants from your pump oil. Clean oil means longer pump life and better performance. OEM quality direct replacement.
This G1 Oil Sight Glass (Part # 550050) lets you quickly check the oil level and condition in your DVP vacuum pump. It fits directly into the pump housing with a standard G1 thread. If your current sight glass is cracked, cloudy, or leaking, replace it with this part.
20 in stock
10 in stock
Not a member? Create an account
Already got an account? Sign in here
Reviews
There are no reviews yet.